LG Stylo 2 Plus Speaker Replacement
The speaker unit may need replacing if the phone sounds muffled or fails to produce sound.
- Replace the speaker unit, a relatively simple task.
- Be gentle when handling the device, as the back is made of fragile plastic.
Step 1 | Rear Case
- Insert a spudger into the opening at the back of the case.
- Slide the spudger parallel to the frame, along the edge of the phone, to force the casing to release.
Step 2 | Battery
Insert the spudger or fingernail into the dimple at the battery's bottom.
- Lift upwards to dislodge the battery.
- Firmly grasp the battery and remove it from the phone.
Step 3 | Speaker
Remove the phone's cover.
- Use a JIS #000 screwdriver to remove the four 4mm screws around the base of the mid-frame.
Step 4
Insert metal spudger into dimple at base of mid-frame.
- Pry upward, separating bottom section of mid-frame from phone.
Step 5
Flip the bottom piece of the mid-frame over to expose the speaker.
- Peel back the rubber covering the speaker using a pair of tweezers.
- Grasp the speaker unit with the tweezers and remove it from the mid-frame.