LG Phoenix 2 Speaker Replacement
Replacing the KRP621 W1P speaker may be necessary if the LG Phoenix 2's speaker is not functioning properly and there is no sound coming from it.
Step 1 | Battery
- Insert a fingernail into the notch located at the bottom edge of the phone.
- Pull the back cover with one hand while holding the rest of the device steady.
- Run your fingernail along the edge to loosen the back cover.
Step 2
- Insert a fingernail into the notch at the bottom edge of the battery.
- Pull the battery out.
Step 3 | Speaker
Locate the SIM card on the back of the phone, top right corner.
- Push the SIM card gently from left to right using your thumb.
Step 4
Remove all 9 Phillips-head screws from the back panel.
- Use a #J00 Phillips head screwdriver.
- Rotate each screw counterclockwise to release.
Step 5
Insert a plastic opening tool into the split at the bottom of the phone, between the bottom shield and the rest of the device.
- Pry the bottom shield to separate it from the phone using the tool.
- Once loose, you can remove it by hand.
Step 6
Insert the flat end of the Spudger between the screen and the chromed frame.
- Run the Spudger along the frame to separate the front part of the phone from the back shield.
Step 7
Use the Spudger to remove the speaker.