LG Phoenix 2 Screen Replacement

Locate the notch at the phone's bottom edge.

• Position a finger in the notch to create leverage.
• Pull with one hand while stabilizing the phone, running your nail along the edge.

Locate the notch at the bottom edge of the battery.

• Use your fingernail to gently pry the battery from its compartment.
• Pull the battery out in a smooth, steady motion.

Locate the SIM card in the top right corner on the back of the phone.

• Push the SIM card from left to right using your thumb.

Remove the back panel by unscrewing all 9 screws using a Phillips head #00 screwdriver.

• Rotate each screw counterclockwise to release it.

Insert a plastic opening tool into the split at the bottom of the phone, between the bottom shield and the rest of the phone.

• Pry the bottom shield using the plastic opening tool to separate it from the phone.
• The shield should be loose enough to be removed with your hand once separated.

Insert the flat end of the Spudger between the screen and the chromed frame.

• Run the Spudger along the frame to separate the front part from the back shield.

• Position the Spudger or plastic opening tool under the camera connector.
• Lever the camera connector free with gentle force.
• After disconnection, remove the camera unit.

Remove the front camera by following the same procedure used for the rear camera, as outlined in the previous step.

Use a Spudger to gently pry out the speaker.

Use the Spudger to remove the screen connector.

Use a spudger to gently pry apart the motherboard and back frame.

Apply gentle heat to the screen using a heat gun or an iOpener

• Move the heat source slowly along the edges of the phone, ensuring uniform heating.

• Insert the Jimmy and run its blade along the outer edge of the screen.
• The screen should now be freed from the frame.