LG Phoenix 2 Power and volume buttons Replacement

Insert a fingernail into the notch at the bottom edge.

• Pull upwards with one hand while keeping the phone stable.
• Run your fingernail along the edge of the back cover.

Locate the notch on the battery at the bottom edge.

• Insert your fingernail into the notch and gently pry the battery loose.
• Pull the battery out of its compartment.

• Identify the SIM card located in the top right corner of the phone's back panel.
• Push the SIM card towards the left using your thumb.

Remove the back panel by first loosening the nine Phillips head #J00 screws with a Phillips head #J00 screwdriver.

• Rotate each screw counterclockwise to loosen.

Be careful not to damage the phone's casing.

• Insert a plastic opening tool into the gap at the bottom of the phone, between the bottom shield and the rest of the device.
• Pry the bottom shield to break its bond with the phone.
• The shield should come loose enough to be removed by hand once pried free.

• Insert the flat end of the Spudger between the screen and the chromed frame.
• Run the Spudger along the frame to separate the front part from the back shield.

• Insert a metallic Spudger under the buttons.
• Gently pull upwards on the Spudger to release the buttons from both sides of the back shield.
• Once the orange part is loose, proceed to the next step.

Insert a plastic opening tool under the buttons frame and lift it off.

Insert a metallic Spudger under the button and gently pull upwards.

• The buttons will detach from the shield using this method.
• Once detached, pass the orange cables through the hole on the backside.