LG Optimus G Pro Speaker Replacement

Ensure prerequisites for inner cover removal are complete before proceeding, as access to the speaker is required.

This guide assumes completion of inner cover removal prerequisite guides.

Step 1 | Remove Back Cover.

Ensure the device is not charging before starting work.

Access the phone by prying from the lower left corner with a fingernail or a plastic opening tool.
Pull off the back casing after gaining access.

Step 2 | Remove the Battery.

Remove the outer casing completely.

The back should resemble the following image.
Pull up on the red mark using your finger to remove the battery.
The battery will come out at an angle, allowing for easy removal.

Once removed, safely proceed with the next step.

Step 3 | Screw Removal

Remove the battery before proceeding.
Locate and count the 14 Phillips head screws on the back of the inner case.
Use a Phillips head screwdriver to remove each screw, storing them safely in a separate location.

Step 4 | Remove Cover

Remove all screws.

Insert the opening tool into a corner, using a sliding motion.
Move the opening tool along the edges to loosen them.
The inside cover will pry apart from the shell.

Step 5 | Completion

Access the internal components by examining the exposed areas.

Step 6 | Speaker Removal.

Insert the plastic opening tool between the inner side of the inside cover and the speaker module.

Be careful not to damage the speaker wires.

Step 7 | Completetion

Remove the speaker for easy replacement.