LG Optimus G Pro Midframe Replacement
Assume you've completed the battery replacement guide.
- This step serves as a prerequisite for additional repairs on the device.
- It will also aid in understanding future repair guides, allowing you to build upon this process.
Step 1 | Remove Back Cover.
Ensure the device is not charging before starting work.
- Pry the back casing off from the small indent on the bottom left using a fingernail or plastic opening tool.
Step 2 | Remove the Battery.
Remove the outer casing, exposing the back.
- Battery pull up from red mark using your finger.
- The battery will come out at an angle and can be removed easily.
Wait until battery is fully removed before proceeding to the next step.
Step 3 | Screw Removal
Remove the battery first.
- Count and locate the 14 screws on the back of the inner case.
- Use a Phillips head screwdriver to remove each screw, placing them in a safe location to avoid loss.
Step 4 | Remove Cover
Remove all screws.
- Insert an opening tool into a corner using a sliding motion.
- Move it along the edges to loosen them.
- The inside cover will pry apart from the shell.
Step 5 | Completion
Verify that the inner cover has been successfully removed.
- Proceed with caution and observe the exposed internal components.
- The following steps will focus on accessing and repairing individual parts within the phone's interior.