Remove the camera assembly for repair or replacement of the defective component.
Remove the back cover with a plastic opening tool.
Remove the battery by prying it up from the bottom right corner using a plastic opening tool.
Remove all eight 4mm screws using a Phillips #00 screwdriver.
Remove the back trim using a plastic opening tool by working around all edges.
Remove the volume button assembly from the side.
Use a plastic opening tool to pry under the silver square, lifting the speaker off.
Be careful not to damage the small tab underneath the speaker, which will be lifted when the speaker is removed.
Use a pry tool to carefully pry underneath the tab attached to the camera, and gently pop it off.
Remove the camera using tweezers, applying gentle yet firm pressure may be required due to its adhesive bond.
Enter your pincode to see if Cash on Delivery is available in your area.