LG K7 T-Mobile Rear Phone Camera Replacement
Remove the battery first, then the back controls, to prevent electric shock.
- Take note of and set aside all screws and the middle button.
Step 1 | Battery
Flip the LG K7 over, with the back of the phone facing upwards.
Identify the small notch situated at the bottom left corner of the device.
Step 2
Insert a plastic opening tool into the notch.
- Lift the back cover upward.
- Holding the bottom portion of the phone down, carefully remove it.
Step 3
Disconnect the battery.
Step 4 | Rear Phone Camera
Locate and remove nine 3.4 mm screws using a Phillips 00 screwdriver.
- These screws hold the rear housing in place.
Step 5
Turn the phone over, with the screen facing upwards.
- Insert a plastic opening tool between the midframe and front panel assembly on one side of the phone.
- Slide the plastic opening tool down the seams to carefully separate the screen from the rest of the housing.
Step 6
Locate the ribbon cable securing the camera's ribbon cable.
- Use a plastic removal tool to carefully remove the camera's ribbon cable from the motherboard.
- Pull the released camera ribbon upwards, and the camera should dislodge from its case.