Hold the battery release button and pull the bottom of the phone from its casing.
Press inward with some force to eject the tray — risk of damage if excessive pressure applied.
Remove the 2 x 5.5mm Phillips #00 screws from the base of the phone.
Insert the plastic opening tool into the seam between the glass screen and the metal body.
Pry the glass from the body with caution — be careful not to apply too much pressure.
Pry only a slight amount, just enough to create a small gap.
Insert a Nylon Spudger into the gap between body and screen.
When reassembling, press down on the edges from top to bottom to secure the screen in place.
Separate the screen from the body.
Identify the auxiliary port on the top right of the phone.
Enter your pincode to see if Cash on Delivery is available in your area.