LG G Vista Charging Dock Replacement
To replace the charging dock on an LG G Vista, gather a spudger and a pair of tweezers.
Step 1 | Battery
Ensure the device is switched completely off.
Step 2
Use a plastic spudger to carefully pry open the case of the device, starting at the charging port.
Step 3
Locate the small notch at the base of the battery.
- Pry the battery upward from the notch using a flathead tool or credit card.
Step 4 | Charging Dock
- Remove all eleven 3.0 mm screws around the phone's edge using a Phillips #000 screwdriver.
Step 5
Lift the hard shell using a plastic spudger or your fingertip.
Step 6
Use a Phillips #000 screwdriver to remove the five 3.0 mm screws.
- Remove the bottom hard shell.
Step 7
Remove the two screws from the device using a Phillips #000 screwdriver.
Step 8
Use a tweezers to lift up both antennas located near the battery.
Step 9
Release the two right-side charging port connectors.
- Push the first connector towards you until it clicks out.
- Repeat for the second connector, pushing it towards you and releasing it.
Step 10
Use a plastic opening tool to lift the charging port.
- Hold the tool firmly and pry the port upward.
- The charging port should now be removable.