LG Fortune Screen Replacement
Always handle your phone with care to prevent further damage.
- Ensure your phone is completely powered off and disconnected from chargers.
- Use an anti-static wristband and mat to avoid static damage.
This guide will assist in replacing the screen on your LG Fortune smartphone. Replace the screen if it's cracked, unresponsive, or displays content issues.
- Follow step-by-step instructions for disassembly, component removal, and new screen installation.
- Replace the screen to restore your device without a full replacement.
Step 1 | Battery
Locate the slit on the lower right side of the phone, or just below the left corner when viewed from the rear.
- Pry the back cover off slowly, starting at the bottom and working up to the top.
Step 2
Insert a flat tool, such as a screwdriver, into the center slot on the bottom of the battery and gently pry it upward.
Step 3 | Motherboard
Use a PH000 screwdriver to remove ten 4mm screws on the back panel.
- Remove the back panel by hand or with a spudger.
- Work slowly, moving side to side, to release the back casing and expose the motherboard.
Step 4
Avoid using a metal spudger, which can cause damage.
- Unplug the video card from the motherboard with a plastic opening tool.
Step 5
Do not use a metal spudger, as it may cause damage.
- Unplug the front facing camera press fit connector from the motherboard by prying upwards with a plastic opening tool or spudger.
Step 6
Use an ESD-safe tool, not a metal one, to avoid damaging your device.
- Unplug the rear-facing camera ribbon cable from the motherboard.
- Pry up the press-fit connector using an ESD-safe spudger.
Step 7
- Locate the motherboard and use a spudger to carefully pry it loose, starting at the top-left corner.
- Gently work your way downwards towards the bottom-right corner.
Step 8 | Rear Camera
Be prepared to apply considerable force, as some strength may be required.
- Unplug the camera from the phone using a metal spudger.
- Get underneath the tape and gently pry out the camera module.
Step 9 | Screen
Locate the magnetised microphone situated at the bottom right corner of the device.
- Gently pry the microphone away from its mounting point using a suitable tool.
- The microphone is now free, and the screen assembly can be removed for replacement.