LG Escape (p870) Rear Camera Replacement

Flip the device over and remove the back cover by inserting a finger or tool into the opening at the bottom.

Lift the battery out from the bottom edge using your finger.

• The battery will be fully accessible once removed.
• You can now access:
• Your SD card.
• Your SIM card.
• Your device's serial numbers.

Remove the four Phillips 00 screws from the speaker assembly.

• The screws secure the speaker assembly to the phone housing.

Insert a flathead screwdriver between the speaker assembly and rear housing.

• Pry the speaker assembly out.
• Set aside for further repair or replacement.

Remove six remaining screws holding the plastic frame to the back housing.

Insert a black plastic spudger or small flathead screwdriver between the back silver bezel and the black area.

• Pry the bezel away from the rest of the phone, working your way around.
• Be careful not to damage any components during prying.

If the frame becomes stuck, do not apply excessive force — risk of damage to internal components.

• Once the frame is free, carefully set it aside.

Release the camera's flex cable using a plastic spudger or safe-open pry tool.

• Remove the camera from its housing.
• Set it aside for now.