LG Enact Screen Replacement
When handling the shattered glass screen, be aware of the risk of injury.
- Ensure your device is powered off completely.
- Fully power down and unplug the phone for safety.
Step 1 | Battery
Use an iFixit opening tool to pry open the back cover from the bottom tab.
Step 2
Remove the battery with an iFixit opening tool.
Step 3 | Speaker
Use a Phillips #00 screwdriver to remove the three 1.2 mm screws securing the speaker.
Step 4
Insert an iFixit opening pick and gently pry the speaker loose.
- Pry on both sides of the speaker until it is completely detached.
Step 5 | Midframe
Use a Phillips #00 screwdriver to remove nine 1.2 mm screws from the midframe.
Step 6
Insert the iFixit opening pick into the seam between the screen and midframe, gently prying it open.
Step 7 | Motherboard
Unplug all four ports connected to the motherboard.
- Remove the two wires from the top of the battery.
- Next, disconnect the remaining two wires underneath the battery.
Step 8
Use an iFixit opening pick to slowly pry out the motherboard.
Step 9 | Charging Port
Peel off the orange strip from the charging port using an iFixit opening pick.
Step 10 | Keyboard
Remove the blue metal plate with an iFixit opening pick.
- Remove the black plastic from inside the battery compartment.
Step 11
Use a Phillips #00 screwdriver to remove seven 1.2 mm screws.
Step 12
Disconnect the ribbon cable from the battery compartment.
Step 13
Remove the plastic top housing or top case.
Step 14 | Screen
Use a Phillips #00 screwdriver to remove the four 1.2 mm screws located in the corners.
Step 15
Use a nylon spudger to carefully pry the screen open.
- Mind the LCD and surrounding plastic edges.
Step 16
- Disconnect both screen connectors.
- Pry the screen open with a spudger.
Step 17
Remove the touch button sensors with a spudger.
Step 18
Disconnect the LCD carefully using a spudger.