LG Enact Keyboard Replacement
Power off your device before proceeding to avoid any accidental keypad entry or electrical shock.
- Identify issues with the slider keyboard, such as unresponsive keys or malfunctioning mechanism.
- Recognize that worn-out components may require a replacement due to prolonged usage and wear.
Step 1 | Battery
Use an iFixit opening tool to pry the bottom tab of the back cover.
Step 2
- Remove the battery using an iFixit opening tool.
Step 3 | Speaker
Remove the 3 x 1.2mm speaker screws with a Phillips #00 screwdriver.
Step 4
Insert an iFixit opening pick and gently pry out the speaker.
Step 5 | Midframe
Remove nine 1.2 mm screws from the midframe with a Phillips #00 screwdriver.
Step 6
Use the iFixit opening pick to gently pry out the midframe.
Step 7 | Motherboard
Unplug all four ports connected to the motherboard.
- Remove the wire pair from the top of the battery.
- Then, disconnect the remaining wire pair underneath the battery.
Step 8
Use an iFixit opening pick to carefully pry out the motherboard.
Step 9 | Charging Port
Peel off the orange charging port strip using a iFixit opening pick.
Step 10 | Keyboard
Remove the blue metal plate with an iFixit opening pick.
- Remove the black plastic within the battery compartment.
Step 11
- Use a Phillips #00 screwdriver to remove seven 1.2 mm screws.
Step 12
Disconnect the ribbon cable connected to the battery compartment.
Step 13
Disconnect and remove the plastic top to access the internal components.
- Release the clips or screws holding the cover in place.
- Gently pry the plastic top away from the device.