LG Aristo MS210 Front and Rear Camera Replacement
Replacing either camera is essential if they're damaged or malfunctioning.
- Remove the camera mounting screws.
- Gently pry the camera unit away from its mount.
- Disconnect the video cables from the camera module.
Step 1 | Battery
Insert spudger into notch at bottom left of phone.
- Aim for a small amount of gentle pressure.
- The back cover should now be removable.
Step 2
- Insert the spudger into the notch at the bottom middle of the battery.
- Apply light pressure to remove the battery.
Step 3 | Command Button
Remove the PH000 bit and use it to unscrew the ten 3.4mm screws as highlighted.
- Use a spudger to gently pry open the inner shell.
- Flip the inner shell over, exposing the clips that hold the command button.
Step 4
- Disconnect the command button clips with a spudger
- Remove the command button
Step 5 | Front and Rear Camera
Disconnect the ZIF connector securing the front-facing camera with the spudger.
Step 6
Use a spudger to disconnect the ZIF connector for the back-facing camera.
Step 7
Disconnect the front camera cable from the logic board.
Be careful not to touch any exposed metal components when handling the camera connectors.
Repeat steps for the rear camera.