How to Apply New Outer Screen Adhesive in Your Google Pixel Fold - Google Pixel Fold

Do not proceed if reusing the small top right adhesive.

Peel off the new small top right adhesive strip from its clear liner.
Place the new adhesive on the top right bracket of the frame.
Press down the adhesive using a spudger or your fingers to secure it in place.

Verify that the large perimeter adhesive aligns with the frame.

Careful alignment is essential to avoid incorrect placement of the adhesive.

Peel off the new adhesive strip from its clear liner, ensuring no residue remains.
Align the adhesive over the frame's top left and bottom left edges first.
Secure the adhesive along the perimeter of the frame in a smooth, even motion.

Press down the adhesive with the flat end of a spudger or your fingers onto the frame.

Peel up the segmented tab at the lower left corner of the large blue liner.

Lift the release tab and carefully remove the large blue protective film.

Support the screen using a stable object.

Use a Torx Plus 3IP driver to reattach the bottom bracket.

Peel up one of the secondary liner tabs using tweezers or your fingers.

If the adhesive begins to separate, use a spudger to hold it down while peeling.

Lift the tab and peel off the secondary liner to expose the top adhesive.

Remove the blue liner from the top right adhesive strip.

Position the screen with its edges aligned to the cutout in the frame.

Align one edge (right) to the frame, ensuring a tight fit without gaps or excess adhesive.
Repeat for the other edge (left).

Press down along the screen's perimeter to attach it firmly to the frame.