Google Pixel 9 Back Glass Replacement

Repairing the phone may compromise its water resistance, depending on the quality of the rear cover adhesive reapplication.

This guide was written by iFixit staff and is not endorsed by Google. Learn more about our guides here.
Follow these steps to replace a cracked or broken back glass on your Google Pixel 9.
You will need a new back glass adhesive for this repair.

Let your Pixel's battery drain below 25% before proceeding, as a charged lithium-ion battery may catch fire if damaged.

Unplug all cables from your phone.
Completely power off your Pixel.
Press and hold the power and volume up buttons simultaneously to access the shutdown menu.

Apply adhesive along the perimeter of the back glass to secure it to the .

When using an opening pick, do not insert it more than 3 mm under the back glass to avoid damaging internal components.

Mark a point on your opening pick 3 mm from its tip with a permanent marker for accurate placement.
If your screen or back glass is heavily cracked, a suction cup may not provide a secure grip. In this case:

Apply overlapping strips of packing tape over the glass to protect yourself and facilitate disassembly.

Ensure there's a large, smooth area near the bottom edge where a suction cup can adhere securely.

Grasp the suction handle firmly and pull upwards with steady force.

Once a gap appears beneath the back glass, carefully insert the pointed end of the opening pick.

Slide the opening pick back and forth along the bottom edge.

Slide the opening pick around the entire perimeter of the phone to slice off the remaining adhesive.

Lightly twist the opening pick at the bottom edge.

Lift the back glass up until you can grip it with your fingers.
Use the opening pick to separate any remaining adhesive sections securing the back glass.

Power your phone on before sealing, testing that it works properly.

Power your phone down when finished.
Apply new adhesive and install your back glass as described in the separate guide.