Google Pixel 9 Pro XL Chip ID
- The chip ID for Google's Pixel 9 Pro XL is:
Ensure you have proper access and clearance before proceeding with any disassembly or repair.
The full teardown details can be found at the linked resource.
Step 1 | Google Pixel 9 Pro XL Chip ID
Identify the following components:
- MT62F2G64D8ZA-023 WT:C: 16 GB LPDDR5 SDRAM memory.
- KLUDG4UHGC-B0E1: 128 GB NAND flash with UFS 3.1 memory controller.
- H1D3M2 Titan M2: Google security coprocessor.
- MAX77779: Analog Devices power management component.
- LN8411: Cirrus Logic switched capacitor battery charger.
- RA9530: Renesas wireless power receiver and transmitter.
- TUSB2E111: Texas Instruments eUSB2 to USB 2.0 repeater.
Step 2
Identify and locate the following components on the motherboard:
- Samsung S5400 Exynos Modem 5400 (5G modem)
- Samsung S5M5540 RF transceiver
- Qorvo QM71018 front-end module
- Qorvo QM77178 front-end module
- Google / USI G6-602650 WiFi & Bluetooth module
- STMicroelectronics ST54L NFC controller with secure element
Step 3
- Replace the Samsung S2MPG14P-A1 and S2MPG15P-A1 power management ICs.
- Also, replace the Samsung power management component.
- Remove the old Cirrus Logic CS35L41B audio amplifier.
- Replace with a new one.
- For the LED flash driver, swap out the Awinic AW3644CSR dual 1.5 A LED flash driver.
- The likely causes are envelope power trackers.
Step 4
The following components are required for the repair:
- Qorvo QM35725 UWB transceiver
- Skyworks SKY58111-11 front-end module
- Skyworks SKY58286-21 front-end module
Step 5
The device contains a 6-axis MEMS accelerometer and gyroscope, model TDK-InvenSense ICM-45631, as well as a pressure sensor and temperature sensor, model TDK InvenSense ICP-20100.