How to Apply New Battery Adhesive in Your Google Pixel 8
This repair was written by iFixit staff and is not affiliated with Google. For more information on our guides, visit our website. This procedure assumes the battery has been removed; if not, follow the battery removal guide first.
Step 1 | Remove the old adhesive
Apply a few drops of highly-concentrated isopropyl alcohol (over 90%) to the old adhesive.
- Use the flat end of a spudger and tweezers to remove the remaining adhesive from the frame.
Wipe any isopropyl alcohol residue with a lint-free or microfiber cloth.
Step 2 | Apply the adhesive
Remove plastic liner from battery if adhesive is pre-installed.
- Apply Tesa tape or similar double-sided tape where old adhesive was if none is present.
Reconnect battery connector temporarily while holding battery above its recess.
Press the battery firmly into its recess to secure it with adhesive, ensuring proper fit and seal.
- Disconnect battery before proceeding.