How to Apply a New Graphite Sheet in Your Google Pixel 8 Pro
Note that this repair guide has not been officially endorsed by Google, but was created by iFixit staff.
- For more information on our repair guides, visit our website.
This guide is intended for replacing the graphite sheet in your Google Pixel 8 Pro.
Step 1 | Align the graphite sheet
Align the graphite sheet by placing the clear liner at the bottom and overlaying it onto your phone.
- Identify the areas with three flaps, which should cover the rear camera assembly.
Step 2 | Remove the clear liner
Remove the larger clear liner from the back of the sheet.
Exposing the adhesive may cause sticking or adhesion issues if not handled properly.
Step 3 | Place the graphite sheet
Be extremely careful during this step as incorrect application requires starting over.
- Place the top edge of the graphite sheet onto the frame, using the lip to guide its position.
- Lay the remaining part of the sheet carefully onto your phone.
Step 4 | Secure the graphite sheet
Do not proceed without securing the graphite sheet firmly to the phone.
- Firmly press down with your fingers on the graphite sheet to secure it to the phone.
- Be careful to avoid damaging the spring contacts near the phone's edges.
Step 5 | Remove the blue liner
Peel up the remaining blue liner, being gentle to avoid damage.
- If a part of the sheet starts peeling up with the liner, carefully place it back onto the