Google Pixel 2 Rear Camera Lens Glass Replacement

Use a hair dryer to warm the rear lens glass until just before it becomes uncomfortable to touch.

• The heat will loosen the adhesive between the lens and its frame.
• This makes it easier to remove the damaged lens

Take extra caution when handling sharp tools near the lens, as damage can affect auto-focusing.

• Remove any broken or scratched glass using tweezers.
• Clean the area with a blow dryer to remove dust and tiny debris.

Risk of damage if sharp tools used near lens.

• Remove old adhesive from ledge of lens frame with a pair of tweezers.
• Clear remaining adhesive for waterproof sealant to adhere properly.
• Be cautious not to scratch the lens when removing adhesive.

Apply clear silicone waterproof sealant after ensuring the lens frame is clean.

• Gently apply the sealant to the ledges of the inside shelf using a wooden toothpick.
• Apply the sealant evenly around the edges, taking your time as it does not dry quickly.

• Place the new rear lens glass on the lens frame using a pair of tweezers, with the glassy side facing outward.
• Hold it firmly but gently in place until the silicone adheres, which should take about five minutes.

Allow at least 24 hours for the silicone to fully dry and cure before further use.

Avoid excessive pressure.

• Use alcohol wipes to remove excess silicone from the edges.
• Ensure the lens is level and flat.

Do not use your phone for approximately two hours. For optimal results, leave it idle for about 24 hours.