Asus PadFone S Front Facing Camera Replacement

Risk of damage to the charging port or surrounding components.

• Insert your thumb into the charging port.
• Pry the back cover off the phone using your thumb.

• Use a T5 Torx screwdriver to remove all screws.
• Lift the back panel from the phone.

• Use tweezers to disconnect the battery from the logic board.
• Lift the battery up from its slot using a plastic opening tool.

Apply consistent, steady force to avoid damaging the battery.

Remove the Battery.

• Proceed to Step 2.

Disconnect the marked strips from the logic board using a pair of tweezers.

Applying excessive force may damage the strips or connectors.

• Remove the speaker connection located at the bottom left-hand corner.

Do not apply excessive force when disconnecting the logic board connectors — risk of damaging the strips.

• Disconnect the other two logic board connectors.

Flip the logic board over to access the front camera.

• Hold the tweezers at the sides of the camera and gently lift it off the logic board.

Avoid applying too much force to prevent damage to the connective strip.