Home Repair Guides Samsung Samsung Galaxy Note Samsung Galaxy Note Samsung Galaxy Note Front Facing Camera Assembly Replacement

Samsung Galaxy Note Front Facing Camera Assembly Replacement

This repair is for installing a new front-facing camera assembly on a Samsung Galaxy Note device.

Step 1 | Stylus

Step 1 image
Thumbnail 1
Thumbnail 2

Grasp the stylus cap and pull it out of its position in the midframe.

Step 2 | Rear Case

Step 2 image
Thumbnail 1
Thumbnail 2

Use a plastic opening tool, or carefully insert your fingertip, into the recess to the right of the rear-facing camera.

Step 3

Step 3 image
Thumbnail 1
Thumbnail 2

Remove the rear case by lifting it off the phone.

Step 4 | Battery

Step 4 image
Thumbnail 1
Thumbnail 2

Insert finger into the notch on the battery compartment.

  • Press the battery towards the rear facing camera.
  • Pull the battery outward.

Step 5 | MicroSD Card

Step 5 image
Thumbnail 1
Thumbnail 2
Thumbnail 3

Press the microSD card gently with a spudger or fingernail to seat it fully.

  • Verify seating with a distinct click.
  • Release the card for easy removal.

Be cautious not to push too hard, which can damage the slot.

For reassembly:

  • Pull out the microSD card and then press it back into its slot.
  • Verify seating with a distinct click once it's securely seated.

Step 6

Step 6 image

Locate and remove the microSD card from its slot on the midframe.

Step 7 | SIM Card

Step 7 image
Thumbnail 1
Thumbnail 2

Push the SIM card out of its compartment using a plastic opening tool or your fingertip.

Step 8

Step 8 image
Thumbnail 1
Thumbnail 2
  • Use your thumb to slide the SIM card further out.
  • Once exposed, carefully remove the SIM card from the device.

Step 9 | Midframe

Step 9 image

Remove nine 3.4 mm Phillips #00 screws that secure the midframe to the display assembly.

Step 10

Step 10 image
Thumbnail 1
Thumbnail 2

Insert the plastic opening tool to the left of the power button, between the midframe and the front panel assembly.

  • Pry carefully between the two parts.

Step 11

Step 11 image
Thumbnail 1
Thumbnail 2
Thumbnail 3

Insert the plastic opening tool along the seam.

Step 12

Step 12 image
Thumbnail 1
Thumbnail 2
Thumbnail 3

Insert plastic opening tool to the left of headphone jack.

  • Slide tool along top edge of phone.
  • Continue running tool around phone's perimeter.
  • Midframe should separate from display assembly.

Step 13

Step 13 image
Thumbnail 1
Thumbnail 2

Remove the midframe from the display assembly.

Step 14 | Upper Display Assembly Bracket

Step 14 image

Use the flat end of a spudger to disconnect the headphone jack/earpiece speaker assembly cable connector.

Step 15

Step 15 image

Remove the two 3 mm Phillips #00 screws securing the upper display assembly bracket.

Step 16

Step 16 image
Thumbnail 1
Thumbnail 2

Remove the upper display assembly bracket using a pair of tweezers, or your fingers.

Step 17 | Front Facing Camera Assembly

Step 17 image
Thumbnail 1
Thumbnail 2

Use tweezers or your fingers to carefully remove the front-facing camera assembly.

Check COD Availability

Enter your pincode to see if Cash on Delivery is available in your area.

Please enter a valid 6-digit pincode