iPhone XS Pentalobe Screws Replacement
This document provides instructions for detaching or substituting the two screws that hold the iPhone XS display assembly in place.These fasteners represent the sole external screws present on the iPhone chassis.Apple employs a distinctive five-point head design for these screws, necessitating the use of a specialized P2 pentalobe driver for their extraction.Successful removal demands the utilization of a P2 pentalobe driver, which is specifically engineered to interface with this unique screw type.The screws affixing the iPhone XS display panel are the only exterior fasteners on the device.
Step 1 | Pentalobe Screws
Prior to commencing the repair process, observe the following precautions.
- Ensure the iPhone's battery level drops to less than 25% to minimize risk.A fully charged lithium-ion battery presents a fire or explosion hazard if damaged.Deactivate the iPhone's power supply to prevent electrical shorts during the repair.
- Utilize a screwdriver to extract the pair of 6.9 mm pentalobe fasteners located along the iPhone's lower perimeter.
- Separating the display assembly will invalidate the iPhone's water resistance capabilities.
- Acquire replacement waterproof seals and prepare them for installation, or exercise extreme caution to prevent moisture ingress if the seals are not replaced during reassembly.