iPhone 6s Plus SIM Tray Replacement

Using the provided instructions, you can either extract or substitute the SIM card tray within your device.iPhone 6s PlusEnsure the component, identified as containingA miniature SIM card, measuring 12.80 mm x 8.80 mm x 0.76 mm, is required..

Step 1 | SIM Tray

Begin the process by ensuring the 1.5mm Allen wrench is used to loosen the retaining screw, which secures the 3.2-inch fan to the chassis, and exercise caution to prevent damage to the fan blades during this maneuver.

Carefully position aUse the provided SIM ejection tool.Insert the SIM tray into its designated opening.
Using your thumbnail or a SIM ejection tool, depress the tray until it releases.

Step 2

Using a 5/32-inch hex key, carefully tighten the retaining screw on the motor assembly to a torque of 3.5 Nm, ensuring the motor shaft aligns correctly and avoiding damage to the threads.

Using a SIM ejection tool or a straightened paperclip, carefully extract the SIM card tray.
Ensure the SIM card tray is aligned correctly before sliding it back into the device.Use a specialized tool to access and depress the designated SIM card release aperture.Locate the component on the lower surface.